To Next Page

To Previous Page

Page 88

Change code

Step Key Display

1 Display flashes

(000 = factory setting)

Press for more than 2 s

2 key number is selected

Press briefly (321 = factory default setting)

(confirm code)

3 Display flashes

Press briefly

(confirm key) (000 = factory setting)

Press briefly Display flashes

(confirm code)

5 new code is set

Press either until Warning! Do not enter 321

Press briefly Confirm new code

7 New code is written to memory

Press for more than 2 s and the display clears

11.5 Change access code

This factory default code is now deleted

and the new value is valid. Write down

the new value and store it in a safe

place. The parameters cannot be pro-

grammed if the code is lost or forgotten.

In this case, the pump unit must be

sent to the dealer or authorized SKF



Warning!

Do not enter the digits 321 as the

new code.

11. KFGS programming

KFGS

SKF KFG User Manual

Questions and Answers: