The multi-functional indicator can only be operated when the ignition is switched
on. After the ignition is switched on, the function displayed is the one which you
last selected before switching off the ignition.
The multi-functional indicator appears in the display » Fig. 6 or in the information
display » page 18 depending on the equipment fitted to your vehicle.
On vehicles with an information display, there is an option to fade out some of
the information.
WARNING
Concentrate fully at all times on your driving! As the driver you are fully re-
sponsible for road safety.
CAUTION
Pull out the ignition key if coming in contact with the display (e.g. when cleaning)
to prevent any possible damage.
Note
■
In certain national versions the displays appear in the Imperial system of meas-
ures.
■
If the display of the second speed is activated in mph, the current speed is not
indicated in km/h on the display.
Memory
Fig. 6
Multi-functional indicator
First read and observe the introductory information and safety warn-
ings on page 14.
ä
The multi-functional indicator is equipped with two automatic memories. The se-
lected memory is shown in the Display » Fig. 6.
The data of the single-trip memory (memory 1) is shown if a 1 appears in the dis-
play. A 2 shown in the display means that data relates to the total distance mem-
ory (memory 2).
Switching over the memory with the help of the button
B
» Fig. 7 on the wind-
shield wiper lever or with the help of the adjustment wheel
D
» Fig. 7 on the
multifunction steering wheel.
Single-trip memory (memory 1)
The single-trip memory collates the driving information from the moment the ig-
nition is switched on until it is switched off. New data will also flow into the cal-
culation of the current driving information if the trip is continued within 2 hours
after switching off the ignition. If the trip is interrupted for more than 2 hours,
the memory is automatically erased.
Total-trip memory (memory 2)
The total-trip memory gathers data from any number of individual journeys up to
a total of 19 hours and 59 minutes driving or 1 999 kilometres driven, and on vehi-
cles which are fitted with an information display up to a total of 99 hours and
59 minutes driving or 9 999 kilometres driven. The memory is deleted when ei-
ther of these limits is reached and the calculation starts all over again.
The total-trip memory will not, contrary to the single-trip memory, be deleted af-
ter a period of interruption of driving of 2 hours.
Note
All information in the memory 1 and 2 is erased if the battery of the vehicle is dis-
connected.
15
Instruments and warning lights
To Next Page
Loading...
