Seat belts
First read and observe the introductory information and safety warn-
ings on page 174.
Keep the seat belts clean!
Clean dirty seat belts using a mild soapy solution and remove coarse dirt with a
soft brush!
Check the condition of all the seat belts on a regular basis.
Belt webbing which has become severely soiled may prevent the inertia reel from
reeling up the belt properly.
WARNING
■
The seat belts must not be removed for cleaning.
■
Never clean the seat belts chemically as chemical cleaning products could
destroy the fabric. The seat belts must also not be allowed to come into con-
tact with corrosive liquids (such as acids etc.).
■
Seat belts which have damage to the webbing, connections, inertia reel or
lock should be replaced by a specialist garage.
■
Inertia reel belts must be completely dried before being reeled up.
ä
180
General Maintenance
To Next Page
Loading...
