Coming Home Switch on/off and adjust the light duration of the Com-
ing Home function.
Leaving Home Switch on/off and adjust the light duration of the Com-
ing Home function.
Footwell light
Switch on/off and adjust the footwell light intensity.
Dayl. dri. light
Switch on/off the “DAY LIGHT” function.
Rear wiper Switch on/off the function for automatic rear window
wiping.
Lane ch. flash
Switch on/off the convenience flashing function.
Travel mode
Switch on/off the travel model function.
Factory setting
Restore the factory setting for the lighting.
Time
The time, time format (12 or 24 hour indicator) and the changeover between sum-
mer/winter time can be set here.
Winter tyres
This where the speed at which a warning signal should sound can be set. This
function is, for example, used for winter tyres with which the permissible maxi-
mum speed is lower than the maximum speed of the vehicle.
When exceeding the speed, the following is shown on the information display:
Winter tyres: max. speed ... km/h
Measures
The units for the temperature, consumption and distance driven can be set here.
Assistants
The tones of the acoustic signals for the parking aid can be adjusted here.
Second speed
The display of the second speed in mph or in km/h can be switched on here
1)
.
Service
Here you can have the remaining kilometres and days until the next service inter-
val displayed, and reset the Service Interval Display.
Factory Setting
After selecting the menu Factory Setting the factory setting of the information
display is established again.
Door, luggage compartment door and bonnet ajar warning
First read and observe the introductory information and safety warn-
ings on page 18.
The door, luggage compartment and bonnet ajar warning lights up if at least one
door, the luggage compartment or bonnet are not closed. The symbol indicates
which door is still open or whether the luggage compartment door or bonnet is
not closed.
The symbol goes out as soon as the doors, luggage compartment door and bon-
net are completely closed.
A warning signal sounds if the car is driven at a speed of more than 6 km/hour
with the door, luggage compartment door or bonnet open.
Auto Check Control
Car state
The Auto Check Control checks the status of certain functions and vehicle compo-
nents. The check is performed constantly when the ignition is switched on, both
when the vehicle is stationary, as well as when driving.
Some operational faults, urgent repairs, service work or other information appear
in the display of the instrument cluster. The displays are shown with a red or yel-
low light symbol depending on the priority of the message.
The red symbols indicate danger (priority 1) while the yellow symbols indicate a
warning (priority 2). Information for the driver may also appear in addition to the
symbols » page 22.
£
ä
1)
Valid for countries where the values are indicated in British measuring units.
21
Instruments and warning lights
To Next Page
Loading...
