Current fuel consumption
First read and observe the introductory information and safety warn-
ings on page 14.
The current fuel consumption level is shown in the display in litres/100 km
1)
. With
this information your style of driving can be adapted to the desired fuel consump-
tion.
The display appears in litres/hour if the vehicle is stationary or driving at a low
speed
2)
.
Average fuel consumption
First read and observe the introductory information and safety warn-
ings on page 14.
The average fuel consumption since the memory was last erased is shown in the
display in litres/100 km
1)
» page 15. With this information your style of driving can
be adapted to the desired fuel consumption.
If you wish to determine the average fuel consumption over a certain period of
time, you must set the memory to zero at the start of the measurement using the
button
B
on the windshield wiper lever » Fig. 7 or the adjustment wheel
D
on
the multifunction steering wheel » Fig. 7. Dashes appears in the display for the
first 100 m you drive after erasing the memory.
The indicated value will be regularly updated while you are driving.
Note
The amount of fuel consumed will not be indicated.
Range
First read and observe the introductory information and safety warn-
ings on page 14.
ä
ä
ä
The estimated range in kilometres is shown on the display. It indicates the dis-
tance you can still drive with your vehicle based on the present level of fuel in the
tank for the same style of driving.
The readout is shown in steps of 10 km. After lighting up of the indicator light for
the fuel reserve the display is shown in steps of 5 km.
The fuel consumption for the last 50 km is taken as a basis for calculating the
range. The range will be increase if you drive in a more economical manner.
If the memory is set to zero (after disconnecting the battery), the fuel consump-
tion of 10 ltr./100 km is calculated for the range; afterwards the value is adapted
accordingly to the style of driving.
Distance travelled
First read and observe the introductory information and safety warn-
ings on page 14.
The distance driven since the memory was last erased appears in the dis-
play » page 15. If you wish to measure the distance driven from a particular time,
you must set the memory to zero at this moment in time by pressing the button
B
on the windshield wiper lever » Fig. 7 or the adjustment wheel
D
on the mul-
tifunction steering wheel » Fig. 7.
The maximum distance indicated in both memories is 1 999 km or 9 999 km on
vehicles with an information display. The indicator is set back to null if this period
is exceeded.
Average speed
First read and observe the introductory information and safety warn-
ings on page 14.
The average speed since the memory was last erased is shown in the display in
km/hour » page 15. If you wish to determine the average speed over a certain pe-
riod of time, you must set the memory to zero at the start of the measurement
using the button
B
on the windshield wiper lever » Fig. 7 or the adjustment
wheel
D
on the multifunction steering wheel » Fig. 7.
£
ä
ä
1)
On some models in certain countries, the display appears in kilometres/litres.
2)
On some models in certain countries, the display appears in --,- kilometres/litres if the vehicle is sta-
tionary.
17
Instruments and warning lights