Preventive maintenance is the easiest and least expensive type of maintenance.
Frequency
Daily
3 months or
150 hours
Yearly
Frequency
Daily
3 months or
150 hours
Yearly
Base
Labels A Base Weldment A
Electrical A Wheel/Tire Assembly A
Limit Switches A Drive Axle A
Hydraulic A Steer Cylinder Assembly A
Battery Compartment Tie Rod A
Battery Tray A Disc Brake A
Battery A Drive Motor A
Fuse Box A Ladder A
Battery Connectors A Outriggers A
Fuse Box A Manuals A
Hydraulic/Electrical Compartment Function Tests
Electrical Panel A Test Battery Connectors A
Manifolds A Base Control Console
Tilt Sensor A Test Platform Raise/Lower Switch A
Hydraulic Oil A Test Base Emergency Stop A
Base Control Switches A Test Emergency Lowering A
Emergency Lowering Access Rod A Platform Control Console
Battery Charger/Hydraulic Compartment Test Platform Emergency Stop A
Hydraulic Tank A Test Enable Trigger Switch A
Hydraulic Oil A Test Platform Raising/Lowering A
Battery Chargers A Test Steering A
Platform Assembly Test Driving A
Lanyard Attachment Anchors A Test Brakes A
AC Outlet on Platform A Test Speed Limit A
Platform Control Console A Test Horn A
Powered Extension Control Console (If Equipped) A
60616AC-ANSI
Lifting Mechanism
Sliders A
Maintenance Support A
Scissor Assembly A
Scissor Bumpers A
Lift Cylinder(s) A
A - Perform Visual and Daily Maintenance Inspections & Functions Test. Refer to Section 2.8 and Section 2.9 of this manual.
B - Perform Scheduled Maintenance Inspection. Refer to Service & Maintenance manual.
* - Maintenance must be performed only by trained and competent personnel who are familiar with mechanical procedure
Use original or manufacturer-approved parts and components for aerial platform.
To Next Page
Loading...
Need help?
General
