Skyjack Rough Terrain 800E Series User Manual

TM
Page 62 December 2007
DC Electric Full-size RTs
Tables Section 2 - Operation
Table 2.8 Operator’s Checklist
P
F
R
N
A
N/A P F R N/A P F R
60617AB-ANSI
Test Horn
- REPAIRED
A
NNUALL
Y
- NOT APPLICABLE
Visual and Daily Maintenance Inspections
BI-ANNUALL
Y
OPERATOR'S CHECKLIST
Each item shall be inspected using the appropriate section of the Skyjack operating manual.
DAILY
- FAIL FREQUENTL
Y
Serial Number:
Model:
Hourmeter Reading: Operator's Name (Printed):
Date:
Time: Operator's Signature:
A
s each item is inspected, check the appropriate box.
- PASS
Battery Compartment
Hydraulic Oil
Hydraulic
Tilt Sensor
Labels
Electrical
Limit Switches
Base
Drive Motor
Base Weldment
Wheel/Tire Assembly
Drive Axle
Steer Cylinder Assembly
Tie Rod
Disc Brake
Hydraulic Oil
Hydraulic/Electrical Compartment
Battery Charger/Hydraulic Compartment
Battery Tray
Battery
Fuse Box
Battery Connectors
Fuse Box
Electrical Panel
Manifolds
Battery Chargers
Platform Assembly
Lanyard Attachment Anchors
AC Outlet on Platform
Platform Control Console
Powered Extension Control Console (If Equipped)
Lifting Mechanism
Sliders
Maintenance Support
Scissor Assembly
Scissor Bumpers
Lift Cylinder(s)
Test Speed Limit
Test Driving
Test Brakes
Test Steering
Test Platform Raising/Lowering
Test Base Emergency Stop
Test Emergency Lowering
Platform Control Console
Test Platform Emergency Stop
Ladder
Outriggers
Manuals
Base Control Switches
Function Tests
Emergency Lowering Access Rod
Hydraulic Tank
Test Battery Connectors
Base Control Console
Test Platform Raise/Lower Switch
Test Enable Trigger Switch
Note:
Make a copy of this page or visit the Skyjack web site:
www.sk
yj
ack.com for a
p
rintable co
py
.









Skyjack Rough Terrain 800E Series Specifications

General

Brand	Skyjack
Model	Rough Terrain 800E Series
Category	Scissor Lifts
Language	English