26
SJ3220, SJ3226, SJ4720, SJ4726, SJ4732223198ABA
Section 1 – Scheduled Maintenance Function Tests
1.9 Function Tests
Do the function tests to nd malfunctions in the
MEWP before it is put into service. The operator must
understand and follow the step-by-step instructions in
the operation manual to do all the MEWP functions.
IMPORTANT
Do not operate a MEWP that does not function
correctly. Lock and tag the MEWP, and remove it
for servicing. Only a qualied service technician
must repair the MEWP. If you do not obey, there is
a risk of death or serious injury.
▪
After repairs are completed, the operator must
do a pre-operation inspection and a series of
function tests again before putting MEWP into
service.
▪
Before you do the function tests, read and
understand the “Start Operation” section of the
operation manual.
▪
Before you do the function tests, look for the
operation manual with the same serial number
as your MEWP. The operation manual has the
instructions on which tests to do and how to do
them correctly and successfully.
To Next Page
Loading...
Need help?
General
