213211AAA SJ63 AJ+
106
Section 8 – Labels Control compartment
Description Label Pictorial
1
Base control console
Push the circuit breakers to reset the power if a power overload or
positive circuit grounding occurs.
Select the platform rotation switch to rotate the platform to the left or
right.
Select the platform-leveling override switch to tilt the platform up or
down.
Select the jib up/down switch to move the jib up or down.
Select the riser raise/lower switch to raise or lower the riser.
Select the turret rotation switch to rotate the turret to the left or right.
Select the main boom raise/lower switch to raise or lower the main
boom.
Select the y boom extend/retract switch to extend or retract the y
boom.
Select the off position to turn the engine off, the base position to
energize the base controls, or the platform position to energize the
platform controls.
Push the emergency-stop button to stop the engine and disable the
controls.
Push and hold the start/function enable/emergency-power switch in
the start position to start the engine.
Push and hold the start/function enable/emergency-power switch in
the function enable position to enable the base control functions.
With the engine off, push and hold the start/function enable/
emergency-power switch in the emergency-power position to
enable the emergency-power unit for emergency descent.
TM
8.5 Control compartment
1
To order go to Discount-Equipment.com
To Next Page
Loading...
Need help?
General
