213211AAA SJ63 AJ+
70
Section 5 – Operation Operate with the emergency power switch at the platform control console
5.21 Operate with the
emergency power switch
at the platform control
console
This switch enables all of the functions, with the
exception of drive, if there is an engine malfunction.
Refer to Section 6.1 for the emergency-lowering
procedure.
5.22 Engage or disengage the
differential lock switch
1. Move the differential lock switch forward and
release it to lock or unlock the differential.
5.23 MEWP shutdown
1. Select a reasonably well-protected location to
park the MEWP. This location must have a rm,
level surface, clear of obstructions, and trafc.
2. Fully retract the boom and lower the platform.
3. Push the emergency-stop button on the
platform control console.
4. Exit the platform.
5. Turn the off/base/platform key switch to the off
position and remove the key.
6. Push the emergency-stop button on the base
control console.
7. Turn the main power disconnect switch to the
off position.
8. If it is necessary, put a cover on the platform
control console to prevent damage to
the warning labels and controls in hostile
environments.
5.24 Generator (optional
equipment)
To start the generator:
1. Make sure the engine is on.
2. Turn the generator on/off switch to the on
position.
To restore normal operation:
3. Turn the generator on/off switch to the off
position.
5.25 Glazier Tray (optional
equipment)
The glazier tray attaches to the kickplate of the
platform. Refer to the glazier operation manual for the
correct operation and maintenance.
1. Turn the capacity derate switch, and check that
the capacity derate light turns on.
5.26 Pipe Rack (optional
equipment)
The pipe rack attaches to the kickplate of the platform.
Refer to the glazier operation manual for the correct
operation and maintenance.
1. Turn the capacity derate switch, and check that
the capacity derate light turns on.
To order go to Discount-Equipment.com
To Next Page
Loading...
Need help?
General
