SJ63 AJ+ 213211AAA
49
Visual and daily maintenance inspections Section 4 – Inspections Before Operation
4.2-10 Optional equipment
Do the inspection that follows, and make sure:
1
Generator and
2
oil cooler
▪
There are no loose or missing parts, and there
is no visible damage.
▪
All hoses are correctly tightened and there is
no sign of hydraulic leakage.
4
Flashing amber light
▪
The lamp is correctly attached, and there is no
visible damage.
5
Welder
▪
The welder and the welder tray are correctly
attached.
▪
There are no loose or missing parts, and there
is no visible damage.
▪
There are no loose wires or missing fasteners.
6
Cold or arctic weather package
▪
The heater plugs are correctly attached with
no visible damage.
▪
There is no sign of engine oil leakage.
7
Tool tray
▪
The tray is correctly attached with lock-pins,
and there is no visible damage..
7
Glazier
▪
There are no loose or missing parts, and there
is no visible damage.
▪
Select the capacity derate switch to derate
mode, and check that the capacity derate light
turns on
8
Pipe Rack
▪
There are no loose or missing parts, and there
is no visible damage.
▪
Select the capacity derate switch to derate
mode, and check that the capacity derate light
turns on
2
1
5
4
3
To order go to Discount-Equipment.com
To Next Page
Loading...
Need help?
General
