EasyManua.ls Logo

Skyjack SJ9233 RT - Fuel Tank Side

Skyjack SJ9233 RT
120 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
41
SJ9233 RT, SJ9243 RT, SJ9253 RT 221491AAA
Visual and daily maintenance inspections Section 4 – Inspections Before Operation
1 2
4.2-8 Fuel tank side
Do the inspection that follows:
WARNING
Explosion or fire hazard. Do not smoke near the
fuel system. If you do not obey, there is a risk of
death or serious injury.
IMPORTANT
Before you use the MEWP, make sure there is
sufficient fuel for the estimated task.
1
Fuel tank
Make sure that the fuel filler cap closes tightly.
Make sure there is no visible damage to the
tank, gauge, hoses, or fittings.
Make sure there is no indication of fuel
leakage from the tank, gauge, hoses, fittings,
pump, and filter.
WARNING
Environmental hazard. Immediately remove
gasoline, diesel fuel, engine oil, and hydraulic
fluid spills and leaks with rags. Discard these
rags in accordance with national, state/provincial/
territorial, and local regulations. Spilled fluids can
damage the environment. When spilled fluids go
into the water (for example, a sewage system,
streams, rivers, or other surface water), they can
kill aquatic life.
2
Propane tank (optional equipment)
Make sure that the propane tank is correctly
installed to the mounting tray.
Make sure there is no visible damage to the
hoses and fittings.
Make sure there is no visible damage to the
propane tank and no indication of propane
leakage.

Table of Contents

Other manuals for Skyjack SJ9233 RT

Related product manuals