58
221491AAA SJ9233 RT, SJ9243 RT, SJ9253 RT
Section 4 – Inspections Before Operation Operator’s checklist
4.4 Operator’s checklist
P N/A Comment (if item does not pass inspection)
Visual and Daily Maintenance Inspections
Labels - Do an inspection for damaged, or missing labels
Electrical - Do an inspection for loose, damaged, or missing components
Hydraulic - Do an inspection for loose, damaged, or missing components
Wheel/tire assembly - Do an inspection for loose, damaged, or missing
components
Wheel/tire assembly
Wheel nuts
Base - Do an inspection for loose, damaged, or missing components
Base weldment
Steer cylinder assembly
Greasing points
Drive axles
Tie rod
Ladder
Outriggers (optional equipment)
Hydraulic/base control side - Do an inspection for leaks and loose, dam-
aged, or missing components
Hydraulic tank
Hydraulic oil level
Main power disconnect switch
Base control
Batteries
Rear side - Do an inspection for leaks and loose, damaged, or missing
components
Manifolds
Fuel tank side - Do an inspection for leaks and loose, damaged, or missing
components
Fuel tank
Propane tank (optional equipment)
Engine side - Do an inspection for loose, damaged, or missing compo-
nents
Engine compartment cover
Engine and engine mounting plate
Engine control console
Radiator
Engine coolant
Muffler and exhaust
Engine oil level
Engine intake air filter
Serial Number:
Model:
Hourmeter Reading:
Date:
Time:
N/A NOT APPLICABLE
Operator’s Name
(Printed):
Operator’s Signature:
Each item shall be inspected using the appropriate section
of the Skyjack operating manual. As each item is inspected,
check or complete the appropriate box.
SJ9233 RT, SJ9243 RT, SJ9253 RT
Daily Operator’s Checklist
P PASS
Add a comment if the item does not pass inspection.
NOTE: Make a copy of this page or go to www.skyjack.com for a copy that you can print.
(page 1 of 2)
To Next Page
Loading...
