Skyjack SJ9253 RT - Base

38
221491AAA SJ9233 RT, SJ9243 RT, SJ9253 RT
Section 4 – Inspections Before Operation Visual and daily maintenance inspections
4.2-5 Base
Do the inspection that follows, and make sure:
1
Base weldment
▪
There are no cracks in the welds or structure.
▪
There are no signs of deformation.
2
Steer cylinder assembly
▪
The steer cylinder assembly is correctly
installed.
▪
There are no loose or missing fasteners.
▪
There is no visible damage.
3
Greasing points
▪
There is no visible damage.
▪
There is no dirt or obstructions.
4
Drive axles
▪
There are no loose or missing parts.
▪
All the fittings and hose connections are tight.
▪
There is no sign of hydraulic leakage.
5
Tie rod
▪
There are no loose or missing parts.
▪
The tie rod end studs are attached and tight.
▪
There is no visible damage.
6
Ladder
▪
There are no loose or missing parts.
▪
There is no visible damage on the left and right
MEWP ladders.
7
Outriggers (optional equipment)
▪
There are no loose or missing parts.
▪
There is no visible damage.
1
3
4
5
6
6
7
7
7
2
7
4
3