c) Front landing gear (2. 3. 4.) – check the following:
• Tyre pressure - Check
• Nose wheel, shock absorber - Check
• Tyre surface and tyre position with regard to wheel rim
(according to red mark) - Check
• Nose landing gear strut - Check
• Nuts and screws secure - Check
• Nose Landing Gear leg - Check
• Nose wheel fork - Check
d) Fuel tanks (1. 19.) – check the following:
• Fuel tank - Check
• Fuel tank ller cap - OPEN
• Fuel quantity - Check, refuel as required
• Fuel tank ller cap - CLOSE and LOCK
• Fuel tank ventilation - Check
e) Wings (1. 5. 6. 7. 8. 15. 16. 17. 18. 19.) – check the following:
• Leading edge; trailing edge and whole wing skin - Check
• Winglets riveting - Check
• Pitott tube – Check
• Wing instalation points - Check
• Nuts and screws secure - Check
To Next Page
Loading...
