c) Front landing gear (2. 3. 4.) – check the following:
- Tyre pressure
- Split pins on wheel axis, fork and shock absorber
attachment
- Nuts on wheel axis, tyre surface and tire slip
- Folding strut, according to airspace in the lock, tightness
of nuts and their security locks on attachment points and
folding strut joint; free movement of roller on the joint bolt
of folding strut
- Control of clearance, control screws and nuts
- End stops of front gear on the front landing gear leg
- Condition and position of shock absorber rubber inserts
- Front gear gate, condition of its surface and suffi cient oiling
- Foot holding and secureness of the landing gear sensors
To Next Page
Loading...
