Maintenance Manual SL 200 Book 2
AIRCRAFT MAINTENANCE REGULATIONS1.
Periodic maintenance1.1.
Act in accordance to the Maintenance Plan, B2-6. Check the particular parts and systems of the aircraft at the stated
time intervals according to its function and wear and during inspection of each part look for faults that could lead to
failure. File the performed check in the Aircraft Book, Engine Book and Propeller Book.
Inspection of control surfaces clearances1.1.1.
Lift the airplane on stands before measuring.
Blocking of control system
Defl ect the directional control from the neutral position. Put the plastic tube with inner diameter Ø 20 mm (0.787 in)
on the right pedal tube (on the right side of the cockpit). Align pedals to the neutral position and drag the tube on the
second pedal too to block directional control. Fix a suitable lath to the side facing of the cockpit using clamps. Fix the
lath to have a contact between the right control stick and the lath in the neutral position. Fix the stick to the lath using
a tape or a clamp and it fi xes the controls on the right side.
Clearances measuring
Measure the control surfaces defl ection with fi xed controls. It is necessary to move the rudder (or the lever) only such
as allows its clearance.
To Next Page
Loading...