Maintenance Manual SL 200 Book 2
MOLYKOTE® products have a consistant high quality, include anti-corrosive ingredients and mainly include the
ingredient MbS for “dry lubrication”. Use recommended kind of lubricants for specifi ed areas. Cu 7439 Plus and BR2
lubricate most points. Clean all parts before each assembly. Use only the volume of lubricant that is necessary to
make a thin fi lm on lubricated surfaces. Lubricate pinned bearings disassembled with recommended grease and then
assembly it again. For lubrication without disassembly, use oil with ingredient M55 plus.
Accumulator maintenance1.3.
A non-maintenance gel accumulator 12V/18Ah (or similar)
is used in the airplane. With this type of accumulator it is not
necessary to check the electrolyte level. The accumulator is
placed on the right side of fi rewall in engine compartment.
Charge the battery as required. Charging is recommended
once or twice a year. When charging, follow the accumulator
manufacturer’s instructions.
Battery is accessible after opening the engine cowling.
To Next Page
Loading...
