- Doubler and its joint
j) Horizontal Tail Unit (9. 10. 11. 12. 13. 14.) ā check the
following:
- Stabilizer and elevator facing
- Stabilizer attachments to the fuselage and its security
locks
- Elevator attachment points, positioning and security locks
- Elevator clearance in carrier and in attachment points
- Trim and its positioning
k) Vertical Tail Unit (9. 11. 12. 14.) ā check the following:
- Rudder pull-rod, its joints and security lock of adjustable
fork
- Fin and rudder facing
- Rudder attachment points and their security locks
- Rudder clearance in attachment points
Write the inspection results into the logbook!
To Next Page
Loading...
