intensity sensor collected by
the BCM, and automatically
controls the on and off of the
low beam position
light.
Caution：
1. In special environments
such as haze, heavy fog,
etc., the automatic control
function will be affected,
please control the light
manually.
2. The automatic control
function will be restricted
due to the external
environment. When it
cannot be used normally,
please turn on the light
manually according to the
needs in time.
“Low beam”
position
Rotate the light control handle
to this position to light up the
low beam, front and rear
position lights, license plate
lights, logo lights and vehicle
button backlights, and the low
beam indicator on the
instrument cluster assy lights
up.
To Next Page
Loading...