“High beam”
position
Rotate the light control handle
to the low beam position, turn
the light combination switch to
the side away from the steering
wheel, the high beam will light
up, and the high beam
indicator on the instrument
cluster assy will light
up.
Move the light adjustment
handle to the steering wheel
and release, the high beam
flashes once, and the high
beam indicator on the
instrument cluster assy flashes
once.
Laser headlight description
(high-equipped only)
Opening conditions:
1. Speed
≥
80km/h；
2. Currently high beam is
turned on.
When the above two conditions
are met, the laser headlights
are automatically turned on.
“Front fog light”
position (Only
mid-to-high model)
When the vehicle is powered
on, turn the light control handle
to low beam or position light
position, and then turn the fog
light control switch to "Front fog
light" position, the front fog light
lights up, and the front fog light
indicator on the instrument
cluster assy lights up; Turn the
fog light control switch to the "
○" position again or when the
To Next Page
Loading...