system will delay the alarm
to a certain extent, making
it more suitable with the
driver’s driving habits；
3. Many factors that affect the
performance of the lane
departure system and
cause it to fail to achieve
the expected function
include (but are not limited
to):
1) Lane lines are blurred,
non-standard lane lines or
lane lines are covered
2) There is water on the
road;
3) Low visibility in the
external environment;
4) Strong light (from
oncoming headlights or
direct sunlight, etc.);
5) The camera lens and
front windshield glass are
damaged, dirty or covered;
6) Roads where the radius
of curvature of the lane is
less than 250m, such as
sharp turns;
7) The road slope is too
large, the road is too
narrow, or winding;
8) Turn on the turn signal;
9) Turn on the failure
warning light;
10) Actively rotate steering
wheel;
11) Operate the
accelerator pedal;
12) Operation brake pedal;
13) It is not detected that
the driver is holding the
steering wheel within ten
seconds;
14) The system is
disturbed；
Warning：
1. The lane departure
warning function is only a
reminder function and does
not carry out vehicle control.
It is mainly used to remind
the driver to drive safely in
the lane, and cannot
replace the driver's
judgment on lane
To Next Page
Loading...