seat, it will not be injured by
airbag inflation.
Installation of child
seats with ISOFIX
system
The child safety seat equipped
with ISOFIX system can be
quickly, conveniently and
safely installed on the vehicle
seat equipped with
corresponding devices.
Be sure to strictly follow the
instructions of the
manufacturer of the child
safety seat when
disassembling and installing
the child seat.
1. Put the safety seat on the
rear seat;
2. Turn the seat sideways
until the bottom is visible;
3. Rotate the ISOFIX handle
to pull out the ISOFIX
connector;
4. Widen the gap between the
seat cushion and the seat
back, and confirm the
position of the ISOFIX
connector near the safety
lock;
5. Place the seat upright,
align the ISOFIX connector
of the child safety seat with
the corresponding part
behind the seat, rotate the
ISOFIX handle to push the
To Next Page
Loading...