ISOFIX connection;
6. Check whether the buckle
is correctly locked;
7. Raise the head pillowto the
highest position, and then
pass the fastening strap
through the headrest;
8. Hang the latch connector
on the fixed hook on the
back of the rear seat;
9. Tighten the latch seat belt;
10. Place the head-pillowat the
lowest position and press
the latch seat belt;
11. Ensure that all unused seat
belts accessible to children
are locked.
There are two ISOFIX fixing
rings on both sides of the rear
seats, and the ISOFIX fixing
rings of the rear seats are
installed on the body.
Warning：
1. The fixing ring can only be
used to connect the
ISOFIX child seat.
2. Do not connect fastening
straps, non-ISOFIX child
seats or any other items to
the fixing ring. Otherwise, it
is very easy to cause
casualties.
Older children ride
Older children who cannot sit
on the child safety seat should
wear a seat belt.
To Next Page
Loading...