SMA SUNNY BEAM User Manual (English)

Questions and Answers:

A
Ashley BallardSep 8, 2025
What to do if Sunny Beam SMA Household Appliance does not list NetID?
- S
  Steven SanchezSep 8, 2025
  If the Sunny Beam SMA Household Appliance doesn't list the NetID of your Bluetooth PV system, try placing the Sunny Beam closer to a device within your Bluetooth PV system or use the SMA Bluetooth repeater. If the NetID 0 or NetID 1 were set on the devices, set free NetIDs in your Bluetooth PV system to the inverters and SMA Bluetooth repeaters, as described in the respective manual. If no NetID has been determined for the Bluetooth PV system, determine a free NetID as described in the section "Determining a free NetID" (page 21).
S
simpsonashleySep 9, 2025
Why Sunny Beam SMA Household Appliance lists inverters from other systems?
- P
  Philip JacksonSep 10, 2025
  If your SMA Household Appliance Sunny Beam lists inverters from other systems, it's likely that another Bluetooth PV system within radio range is using the same NetID. Determine a free NetID again, as described in the section "Determining a free NetID" (page 21), to resolve this.
M
Mathew JohnsonSep 12, 2025
How to disable 'USB can perform better' message for SMA SUNNY BEAM?
- J
  Joel LeblancSep 12, 2025
  If your computer displays a message that the USB can perform better with your SMA Household Appliance, you can disable the message. Be aware that this will also prevent other USB error messages from being displayed. To do this on Windows XP (steps may vary on other operating systems): right-click on "My Computer", select "Device Manager", open "USB Controller", right-click on "Host Controller", select "Properties", select "Advanced", and tick the box that says "Do not display USB errors".