16
Timer function
With this function it is possible to activate a timer that will signal when the time set has
expired.
Press lightly several times on the symbol until the flashing symbol appears along with
0:00 on the timer.
Adjust the desired minutes by operating on + and --. When the time set has passed, an
acoustic signal, which will last for approx. 7 minutes, will inform you that the time has
expired. To stop the acoustic symbol, operate on + or --
Alarm clock function
Press lightly several times on the symbol until the flashing symbol appears along with
the time of day. At this point, use + and -- to adjust the time of day at which you would like to
be informed by the alarm clock. When the time set has passed, an acoustic signal, which will
last for approx. 7 minutes, will inform you that the time has expired. To stop the acoustic
symbol, operate on + or -- .
Core probe function (in models set-up)
The Core Probe is a sensor that can be connected inside the oven and inserted inside the dish
to be cooked. The use of this probe allows automatic interruption of cooking when the inside
of the food reaches the desired temperature.
To activate it, select the desired function and, if necessary, modify the temperature that
appears by default (see the “Modifying the temperature assigned to the function”
paragraph).
Press the key. The pre-set value of the programmed temperature for the probe appears
flashing in the two numbers on the right of the timer (with this function, the timer display is
used to show the core probe temperatures). The word AUTO also appears. Set the
temperature desired for the inside of the food from the values between 20/99°C by
operating on the + or-- buttons.
Press the GO key, PAUSE switches off and cooking starts. The current temperature is visible
on the numbers on the left while the temperature that you have set is visible on the right-
hand numbers of the timer display.
Fast heating function (for some functions only)
This function allows faster oven pre-heating.
After having selected the desired cooking function, press the button. The elements most
suitable for quickly reaching the set temperature are activated and the symbol can be
seen on the display, which will disappear as soon as the temperature is reached. The
program will also emit a warning sign. At this point, the system will state the previously set
functions as active.
Fast heating cannot be activated with the GRILL function, when the difference between
temperature set and that to be reached is lower than 50°C and when the temperature to
reach is lower than 100°C.
Temperatures display
The 5 bars near to the temperature set indicator show the temperature level reached. The
arrow facing upwards and flashing signals that the oven is heating up. After cooking has been
interrupted, while the temperature inside the oven is above 60 °C, a flashing downward
arrow and hot will appear on the display and will remain until the temperature drops below
60 °C.
Acoustic signal: the acoustic signal continues to ring at the end of a program for approx. 7
minutes. Ti stop it, press + or -- indifferently. It is possible to adjust the volume of the signal
to three levels: in the STOP position, operate on the -- symbol, pressing it for approx. 5
To Next Page
