Smalvic FI-95 E - Time Programming Features; Timer and Alarm Clock Functions

26
ATTENTION: during cooking or at the end of cooking, the cap is hot. If the probe is to be
inserted or removed, use relevant gloves or wait for the oven to cool down.
ATTENTION: the food probe cannot be applied during use of the programmed recipes or
those created by the user.
Time programming functions
Setting the timer
The TIMER function is independent from the cooking functions and does not program the
oven.
The function can be activated at any time using key 2 menu :
 from oven off (OFF);
 from oven on (ON) while awaiting commands;
 from oven in cooking mode (ON), without affecting its operation;
For example, with oven off, using the key 2 menu , go onto the timer icon .
Operate on keys 4 and 5 to set the desired value (max time that can be set 12h).
Confirm using key 6 or after 7 sec the value will be auto-confirmed(the countdown starts).
When the time set has passed, an intermittent acoustic signal will sound.
Press any key to stop the signal and exit the TIMER function.
In all cases, the acoustic signal will switch off automatically after 3 mins.
Successively (after one minute), the oven returns to low consumption mode.
With the oven o or in cooking mode, to access the function, proceed in the same way using
the key 2 menu , scrolling the functions and going onto the reference icon. Now proceed
as above.
Setting the alarm clock
The ALARM CLOCK function is independent from the cooking functions and does not program
the oven.
The function can be activated at any time using key 2 menu :
 from oven off (OFF);
 from oven on (ON) while awaiting commands;
 from oven in cooking mode (ON), without affecting its operation;
For example, with oven off, using the key 2 menu , go onto the alarm clock icon .
Operate on keys 4 and 5 to set the desired value (max time that can be set 12h).
Confirm using key 6 or after 7 sec the value will be auto-confirmed
(the countdown starts).
When the time has passed, an intermittent acoustic signal will warn you; press any key to
stop the signal and exit the ALARM CLOCK function.
In all cases, the acoustic signal will switch off automatically after 3 mins.
Successively (after one minute), the oven returns to low consumption mode.
With the oven o or in cooking mode, to access the function, proceed in the same way using
the key 2 menu , scrolling the functions and going onto the reference icon. Now proceed
as above.
Setting timer and alarm clock
The two functions can be set simultaneously at any time.