27
Practically, it is like having two timers. To do this, just follow the same setting procedure
using key 2 menu , first the TIMER and then the ALARM CLOCK (or vice versa).
For example, with oven off:
The two icons are activated together.
The value of the timer will be shown on the display, which will end the countdown first.
The respective acoustic signals will inform of the time passed.
Proceed as above (see reference paragraphs).
With the oven o or in cooking mode, to access the function, proceed in the same way using
the key 2 menu , scrolling the functions and going onto the reference icon. Now proceed
as above.
Cooking time programming
The cooking time programming functions are:
cooking duration ;
automatic cooking : combination between cooking end time and cooking
duration
These functions can activate:
from oven on (ON) while awaiting commands;
from oven in cooking mode;
The timed programming functions are subject to oven switch-on and have effect with
the oven operating.
From oven on in commands stand-by mode, enter time programming mode via the key 2
menu , which allows positioning on the reference icons; also in this case, positioning is
highlighted by the flashing icons.
See the reference paragraphs for the programming methods.
ATTENTION: if the TIMER and the AUTO time and programming
functions are to be set simultaneously, the priority on the time display will be:
- AUTO time programming;
- progressive cooking time
- TIMER functions;
To display the "hidden" TIMERS and/or progressive cooking times, go to the
reference icon using key 2 menu .
Cooking end time
The cooking end time can only be set after having activated the cooking duration function
. The combination of the two functions performs automatic cooking programming (see
reference paragraph).
The cooking end time is restricted to a maximum postponement of 12h. Using key 2 menu,
go onto the flashing icon.
Set the time using keys 4 and 5 .
To Next Page
Loading...