29
Follow the instructions given below to use programming.
ATTENTION: the food probe cannot be applied during use of the programmed recipes or
those created by the user.
Automatic recipes
Enter the recipes menu
Switch the oven on using key 1.
Press key 2 until the flashing “MAN” symbol appears on the display.
Press the “+” key, flashing P AUTO appears.
Press key 6 or wait 5 seconds for automatic confirmation.
The central part of the display shows the first programmed recipe P01 alternately to the
time set, the total duration of the recipe is shown in the top left of the display and the
pre-heating temperature in the top right.
Select the desired programmed recipe.
Follow the 4 points in paragraph “A”.
Press key 2.
P will start to flash.
Press key 6 to confirm. The P and P01, which represent the first recipe programmed,
start to flash.
Press the “+” key until the pre-selected recipe is reached (P01; P32).
Press key 6 to confirm.
Start the programmed cooking by pressing the START key (key 3).
If you wish to postpone the programmed cooking, follow the instructions in the paragraph
below.
Setting the postponed start-up of a programmed recipe
Follow the instructions in paragraph "B" up to point n°. 8.
Press key 2 until the flashing “COOKING END TIME” icon is reached. The display
shows the cooking end time in the top left.
Press key 6 to confirm, the cooking end time starts to flash.
Press the “ + “ key to postpone the cooking end time.
Press key 6 to confirm or wait 5 seconds for automatic confirmation.
Press theSTART key.
The oven is in Pause mode, the time remaining until activation of the programmed cooking
appears in the top left of the display.
In the event of a temporary and unexpected power cut, the process is annulled automatically.
Modifying a recipe with respect to standard factory settings
Follow the 4 points in paragraph “A”.
Press key 2.
Press key 6, P and P01 start to flash.
Press the + key to reach the pre-selected recipe (the oven has 32 programmed recipes
(P01/P32).
Press key 6 to confirm the recipe or wait 5 seconds for automatic confirmation.