1 INTRODUCTION
1.4 Technical Support
Should you experience any difficulties with your product or need further technical information,
please visit our web site (https://www.smaract.com/metrology) or feel free to contact our
technical support:
SmarAct Metrology GmbH & Co. KG
Rohdenweg 4
26135 Oldenburg
Germany
+49 (441) 800 879 -0
metrology@smaract.com
When communicating with our technical support, you will be asked for the serial numbers, which
can be found on the product.
1.5 Signal Words and Symbols
This manual contains sections in which particular hazards are defined or special attention is drawn
to particular conditions. These sections are indicated with signal words and safety symbols (picto-
rial hazard alerts).
1.5.1 Signal Words
Four signal words are used in this documentation: DANGER, WARNING, CAUTION and NOTICE.
The signal words DANGER, WARNING and CAUTION designate the level of hazard when your own
safety, and/or that of other people, is involved. Do not proceed beyond a signal word until the
indicated risks of personal injury are fully understood and all indicated preventive measures have
been taken.
DANGER
Indicates a hazardous situation that, if not avoided, will result in death or serious injury.
WARNING
Indicates a hazardous situation that, if not avoided, could result in death or serious injury.
CAUTION
Indicates a hazardous situation that, if not avoided, could result in minor or moderate in-
jury.
The signal word NOTICE is used when there is a risk of property damage:
www.smaract.com | Page 9Metirio Encoder User Manual
To Next Page
Loading...