Important information
Before you install and use your SMART Board™ 685ix premium appliance-based
interactive whiteboard system, read and understand the safety warnings and cautions
in this user’s guide. This information describes the safe and correct operation of your
SMART Board interactive whiteboard and its accessories and helps prevent injuries
and equipment damage.
If you own a SMART product other than a SMART Board 685ix premium interactive
whiteboard system, refer to the installation guide for your product for relevant
warnings and maintenance instructions.
NOTE
In this document, the term “interactive whiteboard” refers to your interactive
whiteboard and its accessories and options.
Safety warnings and cautions
WARNINGS
• Failure to follow the installation instructions included with your interactive
whiteboard, or found in this guide, could result in personal injury or product
damage.
• Two people are required to safely mount your interactive whiteboard or
projector on a wall mount because they might be too heavy for one person to
safely maneuver alone. When you lift your interactive whiteboard, you and
your assistant should stand on either side of the screen, supporting its weight
at the bottom corners while balancing the top with your other hands.
• Do not leave cables on the floor where they can be a tripping hazard. If you
must run a cable over the floor, lay it in a flat, straight line and secure it to the
floor with tape or a cable management strip of a contrasting color. Handle
cables carefully and avoid excessive bending.
• To reduce the risk of fire or electric shock, do not expose your SMART Board
interactive whiteboard to rain or moisture.
• There are no user-serviceable parts inside the pen tray. Only qualified
personnel should disassemble the pen tray’s printed circuit boards, and this
procedure must be done with proper electrostatic discharge (ESD) protection.
To Next Page
Loading...
