EasyManua.ls Logo

Smart-G SSB10 - Cleaning and Maintenance

Smart-G SSB10
35 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cleaning and maintenance
Do not use rough brush, brightener or thinner etc.
Surface of product could come off or decolorize.
When you clean dirt, use soft towel with
Warning detergent.
Do not clean using water soaked
cloth
Electroshock or
breakdown could
happen.
Prohibitive
It should be opened all kinds of valves and intermediate value for does
not need working boiler when away from home long time in cold
weather
Exposed pipe must be wrapped with
insulating materials. Put additional heat
wire on water supply pipe or hot water
supply pipe and wrap using insulating
materials to prevent freezing
Must do
Caution
Check if there is deformation on
product or deformation over ventilating
shaft. And check if ventilating
shaft is come off
from product..
If exhaust gas leaks,
people can suffer from
CO gas poisoning.
Make sure power cord is connected to
outlet.
For winterization function, power
must be on.
AC 220V/50Hz
Must do
Warning
12