SMART LightRaise - Customer Support; Contacting SMART Technical Support

50 SMART LightRaise Installation and User's Guide
Operating the SMART LightRaise
Projector Mount
The control panel gives you access to the daily functions you require.
System On
Button
System Off
Button
Volume Control Buttons
Volume Level Indicator
Source Selection Buttons
Source Indicators
System On
Indicator
System Off
Indicator
Interpreting the Control Panel Indicators
Use the following chart to understand the control panel indicators.
System On
Indicator
System Off
Indicator
Volume Level and
Source Indicators
State of the SMART LightRaise
Projector Mount
not lit solid red not lit The LightRaise mount is Off.
flashing green not lit not lit The System On button has been
pressed and the LightRaise
mount is powering up.
flashing green not lit lit No Source signal received.
solid green not lit lit The LightRaise mount is on.
not lit flashing red
quickly
(approximately
three times per
second)
not lit The LightRaise mount is powering
down. For about five minutes, you
can press the System On button
to instantly turn the LightRaise
mount back on.
not lit flashing red
slowly
(approximately
once per second)
not lit The LightRaise mount is powering
down.
NOTE:
If any source indicator flashes continually, contact SMART Technical Support. See
page 58 for contact information.