62 SMART LightRaise Installation and User's Guide
NOTES:
1
The cable used to connect the SMART Board interactive whiteboard also carries power to
the board from the Control System. No external power is needed.
2
The console panel isn't an actual device. It's used to show that the wiring is made
available for connection to other devices.
3
Depending on the projector used, the gender on the connector and the type of connectors
used may change.
4
If the VCR/DVD player doesn't have an S-video output, use an RCA/S-video adapter to
output video to the projector.
To Next Page
Loading...
