Chapter 2 Installing the display
smarttech.com/kb/171555 28
l
Fasten force: 97.36–177.01 in-lb. (11–20 N·m)
Caution
Do not over-tighten the bolts.
Installing the display on a stand
If you want to move the display from place to place or if it’s not possible to install the display on a wall,
you can install it on a stand.
Using SMART mobile stands
SMART mobile stands are designed for SMART interactive displays. They are height-adjustable. Some
models include integrated speakers, a locking cabinet to secure equipment, and casters that swivel and
lock for easy movement.
For more information about SMART mobile stands, see smarttech.com/accessories.
Using a third-party stand
For information on selecting and using a third-party stand, see Installing your SMARTBoard MX or MX
Pro on a stand.
Installing the iQ appliance and Intel Compute Card
For SMARTBoard MX series displays
For more information about installing the iQ appliance in SMART Board MX series displays, see the
SMART Board MX series interactive display installation instructions
(smarttech.com/kb/171274).
Caution
Install the AM50 iQ appliance and Intel Compute Card before you turn on the display for the first time.
Important
If you’re installing an AM50 iQ appliance in a display, make sure the display’s firmware is updated to
1.8.7 or later. The display may not function properly if the display’s firmware is not updated. See
Updating firmware for your SMART Board MX.
To Next Page
Loading...
Need help?
General
