Appendix A Adjusting iQ settings
smarttech.com/kb/171555 77
System settings
Option Values Function Notes User or system
setting
System
Access to USB mass
storage devices
On
Off
Enables or disables access to a USB
drive.
This option is not
available for
SMART Board
MX series
displays.
System
Advanced Options
SMARTBoard with iQ On
Off
Enables or disables the iQ
experience.
This option is not
available for
SMART Board
MX series
displays.
System
Default input Inputs available
on the display.
Select the default input the display
will use when starting.
The iQ
embedded
experience is the
default input.
This option is not
available for
SMART Board
MX series
displays.
System
Advanced Pen &Touch Settings
Touch controller
firmware version
[N/A]
Update or roll back the touch
controller firmware version.
[N/A] [N/A]
Automatically update the
touch controller
[N/A] Select to update whenever a new
version of the touch controller
firmware is released.
[N/A] [N/A]
Power
Turn screen off after Disabled
1 min
5 mins
30 mins
1 hour
1.5 hours
2 hours
5 hours
10 hours
Sets the number of minutes of
inactivity before the display goes in
to an energy saving mode.
The default is 60
minutes.
This option is not
available for
SMART Board
MX series
displays.
System
Energy Saver
To Next Page
Loading...
Need help?
General
