A C - C O N V . = F R O N I U
S
1 9 2 . 1 6 8 . 0 0 1 . 1 8 0
NOTE!
After licence activation up to 5 inverters possible!
w a e r m e p u m p e : i d
m 1 9 2 . 1 6 8 . 0 0 1 . 1 0
2
B A T T E R I A : F R O N I U
S
1 9 2 . 1 6 8 . 0 0 1 . 0 2 4
SETTINGS - INVERTER,
HEAT PUMP & BATTERY
Inverter
setting
Select the inverter to be read here.
The complete instructions for the various inverters (Fronius, SolarEdge, Kostal, etc.)
can be found at www.smartfox.at/downloads.
Enter the statically assigned IP address of the inverter here. The static
IP address can
be omitted if the "IP Scan" setting is activated. Using the IP scan, it can take up to
15 minutes until the IP address is displayed.
Complete instructions for licence activation at www.smartfox.at/downloads
IP address inverter
If the IP scan is activated, the entry of the static IP address can be omitted. This setting
is only possible for the 1st inverter.
Heat pump
After licence activation, enter the IP address of the WP to be controlled.
Battery
After activating the licence, enter the IP address of the battery storage unit to be
read.
Complete Licence Activation and Battery Storage Instructions at www.smartfox.at/downloads
38
To Next Page
Loading...
Need help?
General