SmartVent Lite+ User Manual

10
System Operating Settings
Period OFF/ON Schedule
Set VENTILATION mode to AUTO operation (see page 5).
Fan speed will adjust automatically based on the Dew Point and then indoor/outdoor air temperatures. If system is
in either BOOST or RECYCLE modes, the fan will operate at speeds set for those modes.
- On the Home Screen, press SETTINGS
to enter Period OFF/ON Schedule and follow the guide below to
complete the fan OFF/ON settings for each of the four periods available in a 24 hour period.
NOTE: Settings shown are examples only and OFF periods should only be scheduled if absolutely necessary.
- Press HOME
at any stage to exit Period OFF/ON Schedule and return to the Home Screen
- Press SETTINGS
at any stage to return to the previous screen
Select
SCHEDULE
(SCH)
Go to
PERIOD 1
setting
Confirm
SCHEDULE
(SCH)
Select
OFF or ON
value
Go to
PERIOD 3
setting
Confirm
OFF or ON
value
Select
OFF or ON
value
Save all
OFF/ON
values
Go to
Home
Screen
Select
OFF or ON
value
Go to
PERIOD 2
setting
Confirm
OFF or ON
value
Select
OFF or ON
value
Go to
PERIOD 4
setting
Confirm
OFF or ON
value

SmartVent Lite+ Specifications

General

Brand	SmartVent
Model	Lite+
Category	Fan
Language	English