6
Modes
Boost
BOOST enables you to immediately override fan speed settings and boost fan speed to maximum.
- On the Home Screen, press SELECT
for 3 seconds and system’s fan will boost to maximum speed.
- In BOOST mode, the time segments will become a count down to the end of the BOOST mode.
- A quick tap of SELECT
on the Home Screen will exit BOOST mode.
Tap to Exit3 seconds
Recycle
RECYCLE is designed for environments where extremes of temperature are common. When your system is in
VENTILATION mode and the roof cavity temperature exceeds the maximum roof cavity temperature (default =
30ºC) setting, or goes below the minimum roof cavity temperature (default = 5ºC) setting, your SmartVent system
will limit the amount of air entering your home.
RECYCLE
icon will be displayed when your system is in RECYCLE mode. In Advanced Setting Menu, RECYCLE
mode can be disabled (setting 007), Recycle Speed can be adjusted (setting 008) and temperature settings can
be adjusted (settings 009 and 010). The fan will operate on Recycle Speed (default = OFF) during RECYCLE mode.
Display
RECYCLE
speed
Key Lock Setting
When Key Lock is ON, system settings cannot be changed
- Press UP
and DOWN together for 3 seconds, until the KEY LOCK icon is displayed, to confirm that
the system is locked.
- Press UP
and DOWN together for 3 seconds, until the KEY LOCK icon is not displayed, to confirm
that the system is unlocked.
Fan OFF Setting
- On the Home Screen, press SETTINGS and then UP , or DOWN , to toggle to OFF
- Press SELECT
to save the fan OFF setting.
To Next Page
Loading...
Need help?
General
