25 GB/IE
Only use the product as described
and for the specified applications.
If you pass the product on to any-
one else, please ensure that you
also pass on all the documenta-
tion with it.
Intended use
This product is a radio system. It
is used to control the lighting. It is
suitable only for use in an indoor
environment. This product is only
intended for private household use.
Any other use or product modifi-
cation is prohibited and will result
in damage. The manufacturer does
not assume any liability for dam-
age arising from improper use.
The product is not intended for
commercial use.
Scope of delivery
Always check that all the parts
are present and that the product
is in perfect condition immedi-
ately after unpacking.
1 Receiver
3 Transmitters
8 Screws
8 Wall plugs
3 Adhesive strips
1 Set of assembly instructions
and instructions for use
Parts description
1
Receiver
2
LED
3
Receiver button
4
Transmitter
4a
Mounting plate
4b
Button
4c
Cover frame
5
Separator tabs
6
Battery
7
Terminal (circuit / light)
8
Screw
9
Wall plug
10
Adhesive strip
To Next Page
Loading...
Need help?
General
