31 GB/IE
IN L OUT IN
7
Connect the receiver
1
to
the light by connecting the
black or brown cable of the
light to the “
” terminal and
the blue cable of the light to
the “N out” terminal.
Attach the receiver
1
with
two suitable screws (not in-
cluded).
Replace the fuse or switch on
the circuit breaker (I setting)
in the fuse box. The receiver
1
is now ready for operation.
Note: You can connect the prod-
uct to a light with a built-in dimmer,
but the product itself does not have
a dimming function. The light illu-
minates according to the last set
intensity.
If the existing light fixture is a
two-way circuit, (two switches
for the same lamp, as is often
found in hallways, stairwells
or bedrooms), the second
switch must be connected
through. If you are unsure or
have questions, always con-
tact a qualified electrician!
Preparing the
transmitter
4c
4b
First remove the button
4b
and then the cover frame
4c
from the mounting plate
4a
.
To Next Page
Loading...
Need help?
General
