SMC Networks EZ Switch SMCGS8P-Smart - Page 20

Configuring the Switch
3-4
Rate Limiting Sets the rate limiting parameters for ports. 16
Storm Control Sets the broadcast storm control parameters. 23
Port Mirroring Sets up the port mirroring features of the switch to
enable traffic monitoring.
17
Cable Diagnostic Diagnoses cable faults. 3-18
TRUNKS 19
Membership Selects ports to group into static trunks. 20
Settings Configures trunk connection settings. 20
LACP Setup Configures Link Aggregation Control Protocol (LACP)
on the switch.
3-21
LACP Status Shows the LACP groups status. 3-22
VLANS 21
VLAN Membership Configure VLAN port groups. 3-23
VLAN Port Config Configures VLAN behavior for individual ports and
trunks.
21
802.1X 25
Settings Sets up 802.1X port authentication. 25
Statistics Displays the 802.1X statistics collected by the switch. 27
LLDP 3-28
Settings Configures LLDP functions. 3-28
Neighbor Displays neighboring device LLDP statisitics. 3-29
SNMP 3-30
Settings Configures SNMP settings. 3-30
POE 3-31
Settings Configures PoE settings. 3-31
LOGOUT Quits to the Login page.
Table 3-2 Switch Main Menu (Continued)
Menu Description Page