Configuring the Switch
3-28
Web – Click 802.1X, Statistics.
Figure 3-24 802.1X Statistics
LLDP
This page allows you to configure the Link Layer Discovery Protocol (LLDP)
configuration. LLDP allows devices on the network to share information about
themselves for the reasons of simplified troubleshooting, enhanced network
management, and maintaining an accurate network topology. LLDP-capable devices
periodically transmit information in messages called Type Length Value (TLV) fields
to neighbor devices.
Field Attributes
LLDP State
• Port - The port number.
• State - You can choose to disable or enable LLDP for each port. Enabling LLDP
will allow the port to receive and transmit TLVs.
To Next Page
Loading...
Need help?
General
