SMC Networks LEFS25 User Manual

- 12 -
<Speed-Workload graph>
<Speed-Workload graph> LECP6/LECP1/LECPMJ/ＪＸＣ91
LEＦS40 Horizontal Transfer LEＦS40 Vertical Transfer
LECPA
LEＦS40 Horizontal Transfer LEＦS40 Vertical Transfer
(2) Servo motor (24VDC) Ball screw drive
Note 1) The strokes shown in ( ) are produced upon receipt of order.
Note 2) The speed is dependent on the workload. Check the following “Speed-workload graphs” for the selected model.
Note 3) A reference value for correcting an error in reciprocal operation.
Note 4) Impact resistance: No malfunction occurred when the actuator was tested with a drop tester in both an axial direction and
perpendicular direction to the lead screw. (The test was performed with the actuator in the initial state.)
Vibration resistance: No malfunction occurred in a test ranging between 45 to 2000 Hz, when the actuator was tested in both an axial
direction and a perpendicular direction to the lead screw. (The test was performed with the actuator in the initial state.)
Note 5) The "Power consumption" (including the controller) is for when the actuator is operating.
Note 6) The “Standby power consumption when operating” (including the controller) is for when the actuator is stopped in the set position
during operation.
Note 7) The "Momentary max. power consumption" (including the controller) is for when the actuator is operating.
This value can be used for the selection of the power supply.
Note 8) Only applies to actuators supplied with a lock.
Horizontal 7 10 5 11 18
Vertical 2 4 1 2.5 5
～500 1 to 500 1 to 250 2 to 800 2 to 500 1 to 250
501～600 - - 2 to 800 2 to 500 1 to 250
601～700 - - 2 to 630 2 to 420 1 to 230
701～800 - - 2 to 550 2 to 330 1 to 180
Basic type
High precision type
Basic type
High precision type
10 5 20 12 6
20 39 47 78 157
Stroke range
Note2)Speed
[mm/s]
LEFS25A
Work load [kg]
note2)
Max.acceleration/deceleration [mm/s2]
50～500
3,000
Operating temperature range [℃]
Rated voltage [V]
0.05 or less
0.1 or less
Lost motion[mm] note3)
Impact/Vibration resistanc [m/s2] note4)
Motor output [W]
Model
Actuation type
Guide type
Positioning repeeatability [mm]
Max.instantaneous power consumption [W]
note7)
LEFS16A
±0.015（Lead H：±0.02）
lead [mm]
Electric specifications
Motor size
Power consumption [W] note5)
Lock unit
specifications
Actuator specification
Stroke [mm] Note1)
50～800
Operating humidity range [%RH]
90 or less(No condensation)
±0.02
50 / 20
70
□28
113
Servo motor(24VDC)
Incremental A/B (800 pulse/rotation)/Z phase
24VDC±10%
5
Standby power consumption when operating [W]
note6)
30
36
102
63
Motor type
Encoder
Horizontal 4/ Vertical 9
Non-magnetizing lock
2.9
Type note8)
Holding force [N]
Power consumption [W] note9)
□42
5 to 40
Rated voltage [V]
24VDC±10%
Ball screw(LEFS□)、Ball screw+Belt（LEFS□L/R）
Linear Guide
0
10
20
30
40
50
60
0 200 400 600 800 1000 1200
速度：V(mm/s)
水平搬送質量： W(kg)
Bリード
Aリード
Hリード
0
10
20
30
40
50
60
0 100 200 300 400 500 600
速度：V(mm/s)
垂直搬送質量： W(kg)
Bリード
Aリード/H リード
0
10
20
30
40
50
60
0 200 400 600 800 1000 1200
速度：V(mm/s)
水平搬送質量： W(kg)
Bリード
Aリード
Hリード
0
10
20
30
40
50
60
0 100 200 300 400 500 600
速度：V(mm/s)
垂直搬送質量： W(kg)
Bリード
Aリード/H リード
2021-05-2010:32
DW913599

SMC Networks LEFS25 Specifications

General

Brand	SMC Networks
Model	LEFS25
Category	Controller
Language	English