SMC Networks PF2MC7 Series - Summary of Product Parts

-13-
No.PF※※-OMZ0002
Summary of Product parts
Body
Connector pin numbers
(on the product)
1
DC(+)
2
OUT2/Analogue output/
External input/N.C.
3
DC(-)
4
OUT1
Name
Description
Display
∗
See below.
Connector M8 connector for electrical connections.
Lead wire with M8 connector
Lead wire for power supply and outputs.
Piping port
For piping connections. Connected to the fluid inlet at IN and to the fluid outlet at OUT.
Body The body of the product.
∗: A protective tape is affixed to the display. Please remove it before use.
Display
Element
Description
Main screen (2-colour display)
Displays the flow, the status of setting mode and error code.
Sub screen
Displays the accumulated flow, set value, peak/bottom value and line names.
In the measurement mode, the set status is displayed.
Output display (Indicator LED)
Displays the output status of OUT1 and OUT2. When ON: Orange LED is ON.
Unit display
Displays the unit selected.
UP button
Selects a mode and the display shown at the sub screen, and increases the ON/OFF
set values.
SET button
Press this button to select mode and to confirm a set value.
DOWN button
Selects a mode and the display shown at the sub screen, and decreases the ON/OFF
set values.
IO-Link status indicator light
LED is ON when OUT1 is used in IO-Link mode. (LED is OFF in SIO mode)