SMC Networks PF2MC7 Series - Specifications

-93-
No.PF※※-OMZ0002
Specifications
Model
PF2MC7501
PF2MC7102
PF2MC7202
Fluid
Applicable fluid
Air, N
2
(Air quality: ISO8573-1 1.1.2 to 1.6.2)
Fluid temperature range
0 to 50
o
C
Flow
Detecting method
Heating type sensor
Rated flow range
5 to 500 L/min
10 to 1000 L/min
20 to 2000 L/min
Set flow
rate
range
Instantaneous flow 5 to 525 L/min 10 to 1050 L/min 20 to 2100 L/min
Accumulated flow 0 to 999,999,990 L
Min.
setting
unit
Instantaneous flow 1 L/min
Accumulated flow 10 L
Accumulated volume per pulse
(Pulse width = 50 msec.)
1 L/pulse 10 L/pulse
Accumulated value hold
∗1
Select from 2 minutes or 5 minutes
Pressure
Rated pressure range
0 to 0.8 MPa
Proof pressure
1.2 MPa
Pressure loss
Refer to the pressure loss graph
Pressure characteristics
∗2
±5%F.S. (0 to 0.8 MPa, 0.6 MPa standard)
Electrical
Power
supply
volt
age
Used as switch output
device
12 to 24 VDC ±10%
Used as IO-Link device
18 to 30 VDC ±10%
Current consumption
55 mA or less
Protection
Polarity protection
Accuracy
Display accuracy
±3%F.S.
Analogue output accuracy
±3%F.S.
Repeatability
±1%F.S. (±2%F.S. when response time is set to 0.05 second)
Temperature characteristics
±5%F.S. (0 to 50
o
C, 25
o
C standard)
Switch output
Output type
Select from NPN or PNP open collector output
Output mode
Select from Hysteresis mode, Window comparator mode,
Accumulated output mode, Accumulated pulse output mode,
Error output or Switch OFF
Switch operation Select from Normal output or Reversed output
Max. load current
80 mA
Maxi. applied voltage
28 VDC (at NPN output)
Internal voltage drop
(Residual voltage)
1.5 V or less (Load current 80 mA)
Digital filter
∗3
Select from 0.05 s, 0.5 s, 0.15 s, 1.0 s, 2.0 s or 5.0 s
Hysteresis
∗4
Variable
Protection
Short circuit protection
Delay time
∗5
3.4 ms or less
Variable at 0 to 60 s/0.01 step