SMC Networks PF2MC7 Series - F14 Zero-Cut Setting

-59-
No.PF※※-OMZ0002
■[F14] Zero-cut setting
A function to force the display to zero to remove flickering at the lower measurement range.
<Operation>
Press the UP or DOWN button in function selection mode to display [F14].
Press the SET button.
Move on to the setting of the zero cut-off display function.
Setting of zero cut-off function
Press the UP or DOWN button to select the zero cut-off value.
∗: The display above is an example when [L] is selected in PFMC7501 (500 L/min type) with unit selection function.
Press the SET button to set.
Return to function selection mode.
[F14] Zero cut-off setting completed.