-51-
No.PF※※-OMZ0002
Selection of display colour
The display colour (main screen) can be selected depending on the switch
output condition.
∗: The display colour setting is linked to the [F 1] OUT1 setting.
Press the SET button to set.
Return to function selection mode.
[F 2] Setting of OUT2 is completed.
∗1: Selected item becomes valid after pressing the SET button.
∗2: After enabling the setting by pressing the SET button, it is possible to return to the measurement mode by keeping pressing the
SET button for 2 seconds or longer.
To Next Page
Loading...
