SMC Networks SMC8014WN User Manual

錯誤! 尚未定義樣式。
27
SMC8014WN and SMC8014WN2 Wireless Cable Modem Gateway Administrator Manual
Configuring an Apple
®
Macintosh
®
Computer
The following procedure describes how to configure TCP/IP on an Apple Macintosh running
Mac OS 10.2. If your Apple Macintosh is running Mac OS 7.x or later, the steps you perform
and the screens you see may differ slightly from the following. However, you should still be
able to use this procedure as a guide to configuring your Apple Macintosh for TCP/IP.
1. Pull down the Apple Menu, click System Preferences, and select Network.
2. Verify that the NIC connected to the SMC8014WN or SMC8014WN2 is selected in the
Show field.
3. In the Configure field on the TCP/IP tab, select Using DHCP (see Figure 16).
4. Click Apply Now to apply your settings and close the TCP/IP dialog box.
Figure 16. Selecting Using DHCP in the Configure Field

SMC Networks SMC8014WN Specifications

General

Brand	SMC Networks
Model	SMC8014WN
Category	Gateway
Language	English