錯誤! 尚未定義樣式。
68
SMC8014WN and SMC8014WN2 Wireless Cable Modem Gateway Administrator Manual
Schedule Rule Menu
Path: Firewall > Schedule Rule
Schedule rules work with the Gateway’s URL blocking feature (described on page 65) to tell
the Gateway when to perform URL blocking.
Note: The Schedule Rule submenu is not available in the menu bar if Enable
Firewall Module is disabled in the Security Settings (Firewall) menu (see page
57).
Figure 39. Schedule Rule Menu
By default, the Gateway is configured to apply URL blocking 24 hours every day. To change
this setting:
1. To change the days when URL blocking is in force, uncheck Every Day under Week Day.
Then check the days when you want to apply schedule rules to URL blocking.
2. To change the hours when URL blocking is in force, uncheck All Day. Then specify the
start and end times when you want to apply schedule rules to URL blocking. Select AM or
PM, where AM refers to times from Midnight to Noon and PM refers to times from Noon to
Midnight.
3. Click Apply.